The compact, yet powerful JM-1450 Jet-Set water jet from General Pipe Cleaners uses high-pressure water to clear drain lines clogged with grease, sand, sludge and ice.
Navien has introduced three new chemical-free and environmentally friendly products to refresh their PeakFlow lineup of scale prevention solutions. The three models, PeakFlow S, PeakFlow A and PeakFlow C, expand the options made available by Navien to now include point-of-entry and commercial grade scale prevention.
Grundfos’ CR 255 features a new hydraulic design improves everything from impeller to guide vanes to inlet, discharge port, sleeve, and diffuser, taking current energy efficiency and performance standards for vertical multi-stage inline pumps to the next level, the company notes.
Schluter-KERDI and Schluter-KERDI-FIX products can be used to produce a waterproof connection to the QM Drain Flange Edge and the QM Side Outlet Flange Edge drains, the use of QM Drains does not void any warranty provided by Schluter when the QM Drains are installed in conjunction and accordance with the Schluter-Shower System Installation Handbook.
American Standard’s Champion PRO chair-height elongated toilet is engineered to prevent clogs and features the industry’s largest 4” flush valve and extra-wide 2 3/8” glazed trapway, the manufacturer points out.
HamatUSA's Chelsea workstation sink combines the unmatched strength and beauty of natural fireclay with ingenious product design, the company explains.
Navien has added a new 120,000 BTU/h model to the NPN non-condensing tankless water heater lineup. The NPN-120E is the fourth model introduction to the NPN-E (exterior) series. The new size is offered in separate natural gas and liquid propane configurations for outdoor-only operation. NPN-120E provides 4.2 GPM at 45° F temperature rise and stays in-line with the rest of the NPN series at 0.81 UEF.
Klein Tools Digital Level measures 0 to 90°, 0 to 180°, or dual-axis bullseye ranges with preprogrammed, commonly used target pitches for efficiency and ease-of-use.
The Makita XPH14 hammer drill has a full 1,250 inch-pounds of torque (highest torque in its category, Makita notes) and can drill 2 9/16” self-feed bits with ease