New PHCP and PVF Products

RSS

The Powers P1000 general purpose hammer-driven tool uses .22 caliber loads and can set .300 head or 8mm head drive pins up to three inches in length.

Corr/Guard™ is a corrosive-resistant venting system for use as a condensing appliance vent.

The Catalina lavatory pull-out faucet features high-arc styling.

The RIDGID® Root Ranger 3000™ jetter nozzle cleans blocked drains with the power to remove tough grease, sludge build-up, mud and tree roots with a concentrated stream of water at 3000 psi.

The RTG-74 is a new tankless gas water heater in the PRONTO! line that delivers a continuous supply of 100°F to 140°F water at a flow rate as high as 7.4 gallons per minute.

The HOLDRITE® 118-T bracket is a copper bonded steel bracket for supporting 1/2- and 3/4-inch CTS tube within a 2-1/2-inch wall.

The Hole Master™ is a way to clamp onto a pipe and use a drill to cut a hole in the pipe.

The CPVC Mini-Rester eliminates water hammer in CPVC plumbing lines so the CPVC is not forced to absorb all effects of water hammer over time.

The Décor Radiator is an alternative to traditional baseboard heating and is available in five styles and 68 sizes.

The new AMPCO® zero-clearance grease duct provides zero clearance to combustibles by integrating the traditional fire-rated shaft and site-built grease duct into a compact, factory-built duct system.