TOP PRODUCTS OF 2009
April 1, 2010
By Supply House Times Staff
Here are the top products from 10 different manufacturers that were featured in
editorial coverage in Supply
House Times in 2009,
in print and/or online, based on the number of reader inquiries/clicks they
generated. For more information on any of these products, please use the reader
circle numbers.
Condensing Wall-Hung Hydronic Boiler
Raypak introduces the XPak modulating, condensing wall-hung boiler in
model sizes 85 and 120. The XPak achieves 92.6% thermal efficiency at full
fire. Certified for CPVC, polypropylene and SS venting. Direct vent ready,
install as concentric vent or twin penetration for total job site flexibility.
Other features include modulation with 5:1 turn down, synchronized with a
three-speed SS nonferrous pump. The unit is built with an innovative,
state-of-the-art extruded aluminum heat exchanger, ASME H stamp.
Raypak.
Circle 233
Solar Thermal Collectors
Viessmann has added an economy option to its
line of flat plate and vacuum tube solar collectors with the new Vitosol 100-F
flat plate solar collector. It features rugged, high-quality aluminum frame construction,
impact-resistant solar glass, excellent solar energy harvest with a selectively
coated copper absorber, as well as an outstanding price/performance ratio.
Suitable for a wide range of solar thermal applications, the 100-F Series is
ideal for solar domestic hot water (DHW) or pool heating
systems.
Viessmann Manufacturing
Co.
Circle 234
Combination Primary and Battery Backup Sump Pump System
Glentronics Inc.’s new line of combination primary and battery backup
sump pump systems is part of its growing PHCC Pro Series brand. The “Pair of
Pumps” couples an energy efficient primary pump and battery backup pump into
one compact system. The primary pump operates off AC power. If the power is
interrupted, or more water is coming into the sump than the AC pump can handle,
the backup sump pump will begin pumping automatically. The units come
pre-assembled for easy installation and include four float switches for
ultimate protection.
Glentronics Inc.
Circle 235
Non-Potable Piping System
Charlotte Pipe & Foundry Co. introduces the new ReUze piping
system, which is available in CTS sizes 1/2-, 3/4-, 1-, 1-1/2- and 2-inch sizes
in 20-ft. lengths, delivered clean to distributors in sealed
heavy-duty polyethylene bags. The pipe will be the universally accepted
color of purple for non-potable water, and will have two lines of type 180°
apart clearly identifying the contents as “Warning: Non-Potable Water Do Not
Drink.” ReUze will be listed with NSF International and bear the mark “NSF-rw.”
Charlotte Pipe & Foundry Co.
Circle 236
Thermal Insulating Tee-Handle
The Apollo Therma-Seal thermal insulating tee-handle is designed to be
used in applications where piping insulation is required. Manufactured from
high strength glass reinforced nylon, these handles are said to be ideally
suited for the toughest commercial and industrial applications. Handles are
available as a factory-installed option (-11 option suffix) or as a kit for
retrofits.
Apollo Valves.
Circle 237
Slip Fit Tub Spout
Sioux Chief’s Tub Spout is said to be the only slip fit tub spout that
tightens flush to the wall and requires no caulk to finish around the spout. It
provides a convenient, secure method for installing slip fit spouts, installs
directly onto 1/2-inch copper stub out with only a #2 Phillips screwdriver, and
its tightening action helps compress the O-ring seal at stub out for leak-free
installation.
Sioux Chief Manufacturing
Co.
Circle 238
EcoLogic Flapperless Toilets
Niagara’s EcoLogic Flapperless Toilets have a
gravity-flush design that controls water flow with its patented “tipping
bucket” technology — eliminating the need for rubber flappers and flexible
seals in the tank. The EcoLogic Flapperless models also use 1.28 gpf,
qualifying them as high-efficiency toilets (HET) that meet stringent EPA
WaterSense criteria and HET rebate standards.
Niagara Conservation.
Circle 239
Hydronic Heating and Hot Water Recirc Systems Handbook
The new “Hydronic Heating and Hot Water Recirc Systems” pocket manual
from Grundfos was written and developed for technicians in the field. The
richly illustrated handbook was developed by independent hydronic pros and
Grundfos, aiming to be the ultimate field guide for hydronic and hot water
recirc installers. Sections include: basic piping, radiant heat, pump theory,
boilers and troubleshooting.
Grundfos.
Circle 240
High Efficiency Toilet
Gerber Plumbing Fixtures introduces its latest high efficiency toilet
(HET), the new Avalanche 1.28. The company’s most sophisticated and powerful
single-flush gravity-fed toilet, the Avalanche 1.28 uses only 1.28 gallons of
water per flush versus the industry standard 1.6 model. Engineered with
Gerber’s proprietary XP3 flushing system, it clears the bowl quickly and
efficiently. A three-inch flush valve, Fluidmaster fill valve, uniquely
designed jet feed, rim structure and trapway configuration all contribute to
this unit’s performance.
Gerber Plumbing Fixtures
LLC.
Circle 241
Press Snap Soil Pipe Cutter
RIDGID’s Press Snap soil pipe cutter provides a fast and easy way to cut
cast iron soil pipe by eliminating the need for manual ratcheting when it is
connected to a RIDGID press tool. To make a cut, the Press Snap cutter is
attached to the press tool, the Press Snap chain wraps around the pipe, and the
user presses the trigger to make the cut. No need to score the pipe beforehand.
The Press Snap cutter cuts most 1-1/2- to 4-inch no hub and service weight soil
pipe.
RIDGID Tools.
Circle 242
|